iMAX B6-PRO Balance Charger/Discharger

• Specifications:
• Operating Voltage Range: DC 11.0-18.0 Volts
• Circuit Power: Max. Charge Power 80W
• Charge Current Range: 0.1-5.0A
  Discharge Current Range: 0.1-2.0A
• Current Drain for Balancing LiPo: 300 mAh/cell
• NiCd/NiMh Battery Cell Count: 1-15 cells
  Li-ion/Polymer Cell Count: 1-6 series
• Pb Battery Voltage: 2V, 20V

Multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMh cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs.

B6-Pro Includes:
Internal Independent Lithium Battery Balancer:
Employs an individual-cell-voltage balancer to maintain your pack in balance while charging.

Balance Individual Cells During Discharge:
During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of a single cell is abnormal.

Fast and Storage Mode Charging:
"Fast" charge will fully charge a lipoly battery in the shortest time. "Store" setting will charge the battery at approximately a 50% charge for long term storage. This prolongs the useful life of the battery pack.

Charges Various Types of LiPoly Cells:
Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types.

Data Store/Load:
Up to 5 batteries' data can be stored for easy programming.

Cyclic Charging/Discharging:
1-5 Cycles of either charge>discharge or discharge>charge is possible.